User Manual
Table Of Contents
- M4100 Series Managed Switch
- Contents
- 1. Get Started
- 2. Configure System Information
- System Configuration
- Configure Initial Management VLAN Settings
- Define System Information
- View the Switch Status
- Manage Loopback Interfaces
- View the IPv6 Network Neighbor Table
- Configure an IPv4 Management VLAN
- View or Set the System Time
- Configure DNS
- Configure the DHCP Server
- Configure the DHCP Pool
- Configure UDP Relay Global Settings
- Configure the Basic PoE Settings
- Configure Advanced PoE Settings
- View All MIBs Supported by the Switch
- Configure SNMP v3 Settings for a User
- LLDP Overview
- Configure LLDP Global Settings
- Configure an LLDP Interface
- View LLDP Statistics
- View LLDP Local Device Information
- View LLDP Remote Device Information
- View LLDP Remote Device Inventory
- Configure LLDP-MED Global Settings
- Configure the LLDP-MED Interface
- View LLDP-MED Local Device Information
- View LLDP-MED Remote Device Information
- View LLDP-MED Remote Device Inventory
- ISDP Settings Overview
- Configure Timers
- 3. Configure Switching Information
- VLAN Overview
- Configure a Basic VLAN
- Configure an Internal VLAN
- Add a VLAN
- Reset VLAN Configuration
- Configure Internal VLAN Settings
- Configure VLAN Trunking
- Configure VLAN Membership
- View VLAN Status
- Configure Port PVID
- Configure a MAC-Based VLAN Group
- Configure a Protocol-Based VLAN Group
- Configure Protocol-Based VLAN Group Membership
- Configure an IP Subnet–Based VLAN
- Configure Port DVLAN
- Configure a Voice VLAN
- Configure GARP Switch Settings
- Configure GARP Port Settings
- Auto-VoIP Overview
- Spanning Tree Protocol Overview
- Configure Multicast
- IGMP Snooping Overview
- Configure MLD Snooping
- Configure MVR
- Manage MAC Addresses
- Configure Port Settings
- Link Aggregation Group Overview
- VLAN Overview
- 4. Routing
- 5. Configure Quality of Service
- QoS Overview
- Class of Service
- Differentiated Services
- DiffServ Wizard Overview
- Use the DiffServ Wizard
- Configure DiffServ
- Configure the Global Diffserv Mode
- Configure a DiffServ Class
- Configure the Class Match Criteria
- Configure a DiffServ IPv6 Class
- Configure the DiffServ Class Match Criteria
- Configure DiffServ Policy
- Configure DiffServ Policy Attributes
- Configure DiffServ Policy Settings on an Interface
- View Service Statistics
- 6. Manage Device Security
- Management Security Settings
- Configure RADIUS Settings
- TACACS
- Set Up a Login Authentication List
- Configure Management Access
- Manage Certificates
- Manage Telnet
- Port Authentication Overview
- Traffic Control
- Configure a Private Group
- Private VLAN Overview
- Storm Control Overview
- Control DHCP Snooping Settings
- Configure an IP Source Guard Interface
- Configure Dynamic ARP Inspection
- Access Control List Overview
- Use the ACL Wizard
- Create a MAC ACL
- Configure MAC Rules
- Configure ACL MAC Binding
- View or Delete MAC Bindings
- Configure an IP ACL
- Configure Rules for an IP ACL
- Configure IP Extended Rules
- Configure an IPv6 ACL
- Configure IPv6 Rules
- Configure ACL Interface Bindings
- View or Delete IP ACL Bindings
- View or Delete VLAN ACL Bindings
- 7. Monitoring the System
- 8. Maintenance
- A. Default Settings
- B. Configuration Examples
Configure System Information
94
M4100 Series Managed Switch
Total Deletes Specifies the number of times the complete set of information
advertised by a particular MAC Service Access Point (MSAP) was
deleted from tables associated with the remote systems.
Total Drops Specifies the number of times the complete set of information
advertised by a particular MAC Service Access Point (MSAP) could not
be entered into tables associated with the remote systems because of
insufficient resources.
Total Age outs Specifies the number of times the complete set of information
advertised by a particular MAC Service Access Point (MSAP) was
deleted from tables associated with the remote systems because the
information timeliness interval has expired.
Interface Specifies the unit/slot/port for the interfaces.
Transmit Total Specifies the number of LLDP frames transmitted by the LLDP agent
on the corresponding port.
Receive Total Specifies the number of valid LLDP frames received by this LLDP
agent on the corresponding port, while the LLDP agent is enabled.
Discards Specifies the number of LLDP TLVs discarded for any reason by the
LLDP agent on the corresponding port.
Errors Specifies the number of invalid LLDP frames received by the LLDP
agent on the corresponding port, while the LLDP agent is enabled.
Age outs Specifies the number of age-outs that occurred on a given port. An
age-out is the number of times the complete set of information
advertised by a particular MAC Service Access Point (MSAP) was
deleted from tables associated with the remote entries because
information timeliness interval had expired.
TLV Discards Specifies the number of LLDP TLVs discarded for any reason by the
LLDP agent on the corresponding port.
TLV Unknowns Specifies the number of LLDP TLVs received on the local ports that
were not recognized by the LLDP agent on the corresponding port.
TLV MED Specifies the total number of LLDP-MED TLVs received on the local
ports.
TLV 802.1 Specifies the total number of LLDP TLVs received on the local ports
that are of type 802.1.
TLV 802.3 Specifies the total number of LLDP TLVs received on the local ports
that are of type 802.3.
Table 25. LLDP statistics (continued)
Field Description