User Manual

Configure System Information
112
M4200 and M4300 Series ProSAFE Managed Switches Web Management User Manual
The updated configuration is sent to the switch. Configuration changes take effect
immediately.
The following table describes the PoE Configuration nonconfigurable fields.
Configure PoE Settings
 To configure PoE settings:
1. Launch a web browser.
2. Enter http://<ipaddress> in the web browser address field.
The login window opens.
3. Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
4. Click the Login button.
The System Information page displays.
5. Select System > PoE > Advanced > PoE Configuration.
Table 42. PoE Configuration Nonconfigurable Fields
Field Description
Units The Current PoE Unit. You can change the PoE Unit by selecting
another unit ID listed here.
Model The model of the PoE card.
Host The PoE host.
Firmware Version The firmware version of the PoE software component.
Power Status Indicates the power status.
Total Power (Main AC) The total power provided by the MAIN AC power source.
Total Power (RPS) The total power provided by the redundant power source.
Power Source Current source of system power (Main AC or RPS).
Threshold Power System can power up one port, if consumed power is less than this
power. Consumed power can be between Nominal & Threshold Power
values. The threshold power value is determined by the configurable
System Usage Threshold percent.
Consumed Power Total amount of power in watts currently being consumed by connected
PoE devices.