User Manual

Configure System Information
114
M4200 and M4300 Series ProSAFE Managed Switches Web Management User Manual
Configure PoE Ports
 To configure PoE port settings:,
1. Launch a web browser.
2. Enter http://<ipaddress> in the web browser address field.
The login window opens.
3. Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
4. Click the Login button.
The System Information page displays.
5. Select System > PoE > Advanced > PoE Port Configuration.
6. Select the Admin mode (Enable or Disable) to determine the ability of the port to deliver
power.
7. Port Priority is used to determine which ports can deliver power when the total power
delivered by the system crosses a specific threshold.
If the switch cannot supply power to all connected devices, the priority determines which
ports can supply power. The lowest numbered ports with the same Port Priority setting
are given higher priority. Select the priority order from the following list:
• Low. Low priority
• Medium. Medium priority
• High. High priority
• Critical. Critical priority
Threshold Power System can power up one port, if consumed power is less than this
power. i.e. Consumed power can be between Nominal and Threshold
Power values. The threshold power value is effected by changing
System Usage Threshold.
Consumed Power Total amount of a power which is currently being delivered to all ports.
Table 43. PoE Configuration (continued)
Field Description