User Manual

Configure System Information
150
M4200 and M4300 Series ProSAFE Managed Switches Web Management User Manual
9. In the Time Start field, enter the time of the day in format (HH:MM) when the schedule
operation is started.
This field is required. If no time is specified, the schedule does not start running.
10. In the Time End field, enter the time of the day in format (HH:MM) when the schedule
operation is terminated.
11. Use the Date Start to set the schedule start date.
If no date is specified, the schedule starts running immediately.
12. Use the Date Stop to set the schedule termination date.
If No End Date selected, the schedule operates indefinitely.
13. Use the Recurrence Pattern to show with what period the event repeats.
If recurrence is not needed (a timer schedule must be triggered just once), then set Date
Stop as equal to Date Start. There are the following possible values of recurrence:
• Daily. The timer schedule works with daily recurrence
Daily mode. Every WeekDay selection means that the schedule is triggered every
day from Monday to Friday. Every Day(s) selection means that the schedule is
triggered every defined number of days. If number of days is not specified, then the
schedule is triggered every day.
• Weekly. The timer schedule works with weekly recurrence
- Every Week(s). Define the number of weeks when the schedule is triggered. If
number of weeks is not specified, then the schedule is triggered every week.
- WeekDay. Specify the days of week when the schedule operates.
• Monthly. The timer schedule works with monthly recurrence
Monthly mode. Show the day of the month when the schedule is triggered. Field
Every Month(s) means that the schedule is triggered every defined number of
months.
14. Click the Apply button.
The updated configuration is sent to the switch. The configuration changes take effect
immediately.