User Manual

Stacking
161
M4200 and M4300 Series ProSAFE Managed Switches Web Management User Manual
The page is shown in two parts.
6. Select the check box associated with the unit and port to configure:
7. From the Configured Stack mode field, select the operating mode of the port to be either:
• Stack. The port connects to the stack port on another stack member. This is the
default value for back panel stack mode.
• Ethernet. The port operates as a standard switch port that receives and transmits
network traffic. This is the default value for front panel stack mode.
8. Click the Apply button.
The updated configuration is sent to the switch. Configuration changes take effect
immediately.
The following table describes Stack Port Configuration fields.
Table 61. Stack Port Configuration
Field Description
Unit ID The unit.
Port The stackable interfaces on the given unit.
Slot ID The slot ID in the format unit/slot.
Type The type of stackable interfaces on the given unit.
Product Name The name of the XFP/SFP+ adapter.
Running Stack mode The run-time mode of the stackable interface.
Link Status The link status (UP/DOWN) of the port.
Link Speed (Gbps) The maximum speed of the stacking port.