User Manual

Table Of Contents

Getting Started

M4200 and M4300 Series ProSAFE Managed Switches Web Management User Manual

Web Interface Buttons and User-Defined Fields

The following table shows the command buttons that are used on the pages in the web

interface:

IMPORTANT:

When you click the Apply button, your changes are saved for the

web management session but are not retained by the switch when it

is rebooted. You can manually save the configuration permanently

(see Save the Configuration on page 652) or you can enable the

automatic saving feature (see Configure Auto Save Mode on

page 652), which lets the switch save the configuration

permanently.

User-defined fields can contain 1 to 159 characters, unless otherwise noted on the

configuration web page. All characters can be used except for the following (unless

specifically noted in for that feature):

Interface Naming Conventions

The switch supports physical and logical interfaces. Interfaces are identified by their type and

the interface number. The physical ports are gigabit interfaces and are numbered on the front

panel. You configure the logical interfaces by using the software.

Table 1. Web interface command buttons

Button Function

Add Clicking the Add button adds the new item configured in the heading row of a table.

Apply Clicking the Apply button sends the updated configuration to the switch. Configuration

changes take effect immediately.

Cancel Clicking the Cancel button cancels the configuration on the page and resets the data on

the page to the previous values of the switch.

Delete Clicking the Delete button removes the selected item.

Update Clicking the Update button refreshes the page with the latest information from the device.

Logout Clicking the Logout button ends the session.

Table 2. Invalid characters for user-defined fields