User Manual

Configure Switching Information
221
M4200 and M4300 Series ProSAFE Managed Switches Web Management User Manual
9. Click the Apply button.
The updated configuration is sent to the switch. Configuration changes take effect
immediately.
The following table describes the nonconfigurable data that the PVST/RPVST Interface
Configuration page displays.
View PVST Statistics
You can view and configure Per VLAN Spanning Tree Protocol (PVST)/Per VLAN Rapid
Spanning Tree Protocol (RPVST) Statistics settings for the device.
 To view the PVST/RPVST statistics:
1. Launch a web browser.
2. Enter http://<ipaddress> in the web browser address field.
The login window opens.
3. Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
4. Click the Login button.
The System Information page displays.
5. Select Switching > STP > Advanced > PVST Statistics.
Table 84. PVST/RPVST Interface Configuration
Field Description
Interface The list of physical interfaces and LAGs.
Role Indicates the role of the interface. Possible values are as follows:
Disabled, Root, Designated, Alternate, Backup, and Master.
Note: The blank field is displayed for the interface which is
not included for the specified VLAN.
Status Indicates the status of the interface. Possible values are as follows:
Discarding, Learning, Forwarding, and Disabled.
Note: The blank field is displayed for the interface which is
not included for the specified VLAN.