User Manual

Configure Switching Information
241
M4200 and M4300 Series ProSAFE Managed Switches Web Management User Manual
6. Use Querier Admin Mode to select the administrative mode for MLD snooping for the
switch. The default is Disable.
7. Use Querier Address to specify the snooping querier address to be used as source
address in periodic MLD queries.
This address is used when no address is configured on the VLAN on which query is being
sent. The supported IPv6 formats are x:x:x:x:x:x:x:x and x::x.
8. Use MLD Version to specify the MLD protocol version used in periodic MLD queries.
9. Use Query Interval(secs) to specify the time interval in seconds between periodic queries
sent by the snooping querier.
The query interval must be a value in the range of 1 to 1800. The default value is 60.
10. Use Querier Expiry Interval(secs) to specify the time interval in seconds after which the
last querier information is removed.
The querier expiry Interval must be a value in the range of 60 to 300. The default value is
60. The page displays VLAN IDs enabled for the MLD snooping querier.
11. Click the Apply button.
The updated configuration is sent to the switch. Configuration changes take effect
immediately.