User Manual

Configure Switching Information
243
M4200 and M4300 Series ProSAFE Managed Switches Web Management User Manual
The following table describes the nonconfigurable information displayed on the page.
Configure MVR
You can configure basic, advanced, group, interface or group membership settings.
Configure Basic MVR Settings
 To configure basic MVR settings:
1. Launch a web browser.
2. Enter http://<ipaddress> in the web browser address field.
The login window opens.
3. Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
4. Click the Login button.
The System Information page displays.
5. Select Switching > MVR > Basic > MVR Configuration.
Table 90. Querier VLAN Configuration
Field Description
Operational State The operational state of the MLD snooping querier on a VLAN. It can be in
any of the following states:
• Querier: Snooping switch is the querier in the VLAN. The snooping
switch sends out periodic queries with a time interval equal to the
configured querier query interval. If the snooping switch sees a better
querier in the VLAN, it moves to non-querier mode.
• Non-Querier: Snooping switch is in non-querier mode in the VLAN. If
the querier expiry interval timer is expired, the snooping switch moves
into querier mode.
• Disabled: Snooping querier is not operational on the VLAN. The
snooping querier moves to disabled mode when MLD snooping is not
operational on the VLAN or when the querier address is not configured
or the network management address is also not configured.
Operational Version The operational MLD protocol version of the querier.
Last Querier Address The IP address of the last querier from which a query was snooped on the
VLAN.
Last Querier Version The MLD protocol version of the last querier from which a query was
snooped on the VLAN.
Operational Max Response Time Displays maximum response time to be used in the queries that are sent by
the snooping querier.