User Manual

Table Of Contents

Routing

292

M4200 and M4300 Series ProSAFE Managed Switches Web Management User Manual

The page is shown in three parts.

6. Use one of the following methods to select an interface:

• In the Go To Interface field, enter the interface in the unit/slot/port format and click on

the Go button.

• Next to the Port column, select the check box for the interface that you want to

configure.

7. Use Description to enter the description for the interface.

8. Use IP Address Configuration Method to enter the method by which an IP address is

configured on the interface.

There are three methods: None, Manual, and DHCP. By default the method is None. Use

the None method to reset the DHCP method.

Note: When the configuration method is changed from DHCP to None, there

is a minor delay before the page refreshes.

9. Use IP Address to enter the IP address for the interface.

10. Use Subnet Mask to enter the subnet mask for the interface.