User Manual

Routing
319
M4200 and M4300 Series ProSAFE Managed Switches Web Management User Manual
View or Configure the ARP Table
You can change the configuration parameters for the Address Resolution Protocol (ARP)
table. You can also use this page to display the contents of the table.
 To configure the ARP table:
1. Launch a web browser.
2. Enter http://<ipaddress> in the web browser address field.
The login window opens.
3. Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
4. Click the Login button.
The System Information page displays.
5. Select Routing> ARP > Advanced > ARP Table Configuration.
Type The type of ARP entry. Possible values are as follows:
• Local. An ARP entry associated with one of the switch’s routing
interface’s MAC addresses.
• Gateway. A dynamic ARP entry whose IP address is that of a
router.
• Static. An ARP entry configured by the user.
• Dynamic. An ARP entry that was learned by the router.
Age Age since the entry was last refreshed in the ARP table (in seconds).
Table 118. ARP Cache (continued)
Field Description