User Manual

OSPF and OSPFv3
389
M4200 and M4300 Series ProSAFE Managed Switches Web Management User Manual
The following table describes the nonconfigurable data that is displayed.
View the OSPFv3 Link State Database
 To view the OSPF link state database:
1. Launch a web browser.
2. Enter http://<ipaddress> in the web browser address field.
The login window opens.
3. Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
4. Click the Login button.
The System Information page displays.
5. Select Routing > OSPFv3 > Advanced > Link State Database.
Table 145. Advanced OSPFv3 Neighbor Table
Field Description
Interface The interface for which data is to be displayed or configured. Slot 0 is
the base unit.
Interface Identifier The interface ID that the neighbor advertises in its hello packets on this
link.
Router ID A 32-bit integer in dotted-decimal format representing the router ID of
the neighbor on the selected interface.
Area ID A 32-bit integer in dotted-decimal format representing the area
common to the neighbor selected.
Options A bit mask corresponding to the neighbor's options field.
Router Priority The priority of this neighbor in the designated router election algorithm.
A value of 0 signifies that the neighbor is not eligible to become the
designated router on this particular network.
State The state of the relationship with this neighbor.
Dead Time The amount of time, in seconds, since the last hello was received from
adjacent neighbors. Set to 0 for neighbors in a state less than or equal
to Init.
Events The number of times this neighbor relationship changed state, or an
error occurred.
Retransmission Queue Length An integer representing the current length of the selected neighbor's
retransmit queue.