User Manual

Multicast Routing
424
M4200 and M4300 Series ProSAFE Managed Switches Web Management User Manual
The valid values are from 0 to 2147483647. The default value is 1.
12. Click the Apply button.
The updated configuration is sent to the switch. Configuration changes take effect
immediately.
The following table describes the nonconfigurable data that is displayed.
View the PIM Neighbor
 To view the PIM neighbor:
1. Launch a web browser.
2. Enter http://<ipaddress> in the web browser address field.
The login window opens.
3. Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
4. Click the Login button.
The System Information page displays.
5. Select Routing> Multicast > PIM > PIM Neighbor.
6. To refresh the page with the latest information on the switch, click the Update button.
Table 164. Multicast PIM Interface Configuration
Field Description
Protocol State The state of PIM in the router. either Operational or Non-Operational.
IP Address The IP address of the selected PIM interface. If you enter an IPv6
address, the format is prefix/prefix length.
Designated Router The designated router on the selected PIM interface.
Neighbor Count The number of PIM neighbors on the selected interface.