User Manual

Multicast Routing
445
M4200 and M4300 Series ProSAFE Managed Switches Web Management User Manual
The following table describes the nonconfigurable data that is displayed.
View and Clear IPv6 MLD Traffic
 To view and clear IPv6 MLD traffic:
1. Launch a web browser.
2. Enter http://<ipaddress> in the web browser address field.
The login window opens.
3. Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
4. Click the Login button.
The System Information page displays.
5. Select Routing> IPv6 Multicast > MLD > MLD Traffic.
Table 175. IPv6 Multicast MLD Groups
Field Description
Interface The interface for which data is to be displayed.
Group IP The address of the MLD members.
Last Reporter The IP address of the source of the last membership report received for
this multicast group address on the selected interface.
Up Time The time elapsed in seconds since the multicast group was known.
Expiry Time Time left in seconds before the entry is removed from the MLD
membership table of this interface.
Filter Mode The filter mode of the multicast group on this interface. Possible values
are Include and Exclude.
Version 1 Host Timer The time remaining until the router assumes that there are no longer
any MLD version 1 hosts on the specified interface.
Group Compat Mode The compatibility mode of the multicast group on the interface. The
values it can take are MLDv1 and MLDv2.
Source Hosts This parameter shows source addresses that are members of this
multicast address.
Source Address (Expiry Time) This parameter shows expiry time interval against each source address
that is a member of this multicast group. This is the amount of time after
which the specified source entry is aged out.