User Manual

Multicast Routing
451
M4200 and M4300 Series ProSAFE Managed Switches Web Management User Manual
6. In the Source IP field, enter the IP address that identifies the multicast packet source for the
entry you are creating.
7. In the Prefix Length field, enter the prefix length to be applied to the Source IPv6 address.
8. In the RPF Neighbor field, enter the IP address of the neighbor router on the path to the
source.
9. In the Metric field, enter the link state cost of the path to the multicast source.
The range is 0 to 255; the default is 1. You can change the metric for a configured route
by selecting the static route and editing this field.
10. Select the interface number from the RPF Interface list.
This is the interface that connects to the neighbor router for the given source IP address.
11. Click the Add button.
The static route is added to the switch.
12. Click the Apply button.
The updated configuration is sent to the switch. Configuration changes take effect
immediately.