User Manual

Manage Device Security
505
M4200 and M4300 Series ProSAFE Managed Switches Web Management User Manual
6. Select the HTTP Access Disable or Enable radio button.
This specifies whether the switch can be accessed from a web browser. If you enable
web mode, you can manage the switch from a web browser. The factory default is
Enable.
7. In the HTTP Port field, enter the HTTP port number.
The valid range is 80 and 1025 to 65535. The default value is 80.
8. In the HTTP Session Soft Timeout (Minutes) field, set the inactivity time-out for HTTP
sessions.
The value must be in the range of 1 to 60 minutes. The default value is 5 minutes. The
currently configured value displays.
9. In the HTTP Session Hard Timeout (Hours) field, set the hard time-out for HTTP sessions.
This time-out is unaffected by the activity level of the session. The value must be in the
range of 1 to 168 hours. The default value is 24 hours. The currently configured value is
displayed.
10. In the Maximum Number of HTTP Sessions field, set the maximum allowable number of
HTTP sessions.
The value must be in the range of 0 to 16. The default value is 16. The currently
configured value is displayed.
11. Click the Apply button.
The updated configuration is sent to the switch. Configuration changes take effect
immediately.
The Authentication List field displays the list that HTTP is using.