User Manual

Manage Device Security
517
M4200 and M4300 Series ProSAFE Managed Switches Web Management User Manual
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
4. Click the Login button.
The System Information page displays.
5. Select Security > Access > Telnet.
6. Next to Allow new telnet sessions, select the Disable or Enable radio button.
This specifies whether the new inbound Telnet session is enabled or disabled. The
default value is Enabled so that new inbound Telnet sessions can be established until
there are no more sessions available. If it is disabled, no new inbound Telnet sessions
are established. An established session remains active until the session is ended or an
abnormal network error ends the session.
7. In the Session Timeout field, specify how many minutes of inactivity occur on an inbound
Telnet session before the session is logged off.
You can enter any number from 1 to 160. The factory default is 5 minutes.
8. In the Maximum Number of Sessions field, specify how many simultaneous inbound
Telnet sessions are allowed.
The maximum is 5, which is also the factory default.
9. Click the Apply button.
The updated configuration is sent to the switch. Configuration changes take effect
immediately.
The Current Number of Sessions field displays the number of current inbound Telnet
sessions.