User Manual

Configure System Information
53
M4200 and M4300 Series ProSAFE Managed Switches Web Management User Manual
13. Click the Apply button.
The updated configuration is sent to the switch. Configuration changes take effect
immediately.
In the IPv6 Default Route Configuration section of the page, the nonconfigurable IPv6
Default Route that is displayed is the default route for the IPv6 VLAN interface.
14. To make changes, do the following:
• To add or remove the IPv6 default route, select the Change IPv6 Default Route
option, and specify the address value in the IPv6 Default Route Address field.
• To reset the IPv6 management interface to the default VLAN 1, select the Set
Management Interface to Default option.
15. If you make any changes, click the Apply button.
The updated configuration is sent to the switch. Configuration changes take effect
immediately.
By default there is no IPv6 Management Interface.
The current IPv6 Management Interface Status is displayed at the bottom of the page.
The table below describes the nonconfigurable fields.
Table 17. Current IPv6 Management Interface Status
Field Description
Management Interface Displays the current IPv6 management interface
Link State Indicates whether the link status is up or down.