User Manual

Configure System Information
54
M4200 and M4300 Series ProSAFE Managed Switches Web Management User Manual
Configure an IPv4 Management Interface
Use this page for port-based IP management for IPv4.
 To configure an IPv4 management interface:
1. Launch a web browser.
2. Enter http://<ipaddress> in the web browser address field.
The login window opens.
3. Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
4. Click the Login button.
The System Information page displays.
5. Select System > Management > Management Interfaces > IPv4 Management Interface
Configuration.
IPv6 Routing Interface
Status/Operational Mode
Indicates whether the link status is up or down for the management
interface.
MAC Address The MAC address assigned to the management interface.
IPv6 Enable Mode Indicates whether IPv6 Enable Mode on the management interface is
enabled or disabled.
IPv6 Routing Mode Indicates whether IPv6 Routing Mode on the management interface is
enabled or disabled.
Stateless Address Autoconfig
Mode
Indicates whether the IP address autoconfiguration mode on the
management interface is enabled or disabled.
DHCPv6 Client Mode The Address DHCP mode on the management interface.
IPv6 Default Gateway The IPv6 default gateway of the switch.
IPv6 Next Hop Interface The IPv6 next hop interface of the switch.
Prefix Length The prefix length on the management interface.
EU164 The EUI-64 flag of the IPv6 address on the management interface.
Current State The current state of the IPv6 address on the management interface.
Table 17. Current IPv6 Management Interface Status
Field Description