User Manual

Manage Device Security
596
M4200 and M4300 Series ProSAFE Managed Switches Web Management User Manual
4. Click the Login button.
The System Information page displays.
5. Select Security > ACL > Advanced > IP Rules.
If no rules exists, the Basic ACL Rule Table shows the message No rules have been
configured for this ACL. If one or more rule exists for the ACL, the rules display in the
Basic ACL Rule Table.
6. From the ACL ID menu, select the IP ACL for which you want to add or a change a rule.
For basic IP ACLs, this must be an ID in the range from 1 to 99.
7. Take one of the following actions:
• To add an IP ACL rule, click the Add button.
• To change an existing rule, click the rule hyperlink in the Sequence Number column
of the Basic ACL Rule Table.
8. Configure the following options for the rule:
• Sequence Number. Enter a whole number in the range of 1 to 2147483647. This
number is used to identify the rule. An IP ACL can contain up to 1023 rules.
• Action. Specify what action is taken if a packet matches the rule’s criteria. The choice
is Permit or Deny.