User Manual

Manage Device Security
613
M4200 and M4300 Series ProSAFE Managed Switches Web Management User Manual
The following table describes the information displayed in the IP ACL Binding Table.
Configure VLAN ACL Bindings
 To configure VLAN ACL bindings:
1. Launch a web browser.
2. Enter http://<ipaddress> in the web browser address field.
The login window opens.
3. Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
4. Click the Login button.
The System Information page displays.
5. Select Security > ACL> Advanced > VLAN Binding Table.
6. In the VLAN ID field, enter the VLAN ID to which the binding must apply.
7. From the Direction menu, select the packet filtering direction.
8. In the Sequence Number field, enter an optional sequence number.
You can specify an optional sequence number to indicate the order of this access list
relative to other access lists that are already assigned to the VLAN ID and selected
direction. A lower number indicates a higher precedence order. If a sequence number is
already in use for the VLAN ID and selected direction, the specified access list replaces
Table 217. IP ACL Binding Table
Field Description
Interface Displays the selected interface.
Direction Displays the selected packet filtering direction for the ACL.
ACL Type The type of ACL assigned to the selected interface and direction.
ACL ID/Name The ACL number (in the case of the IP ACL) or ACL name (in the case
of Named IP ACL and IPv6 ACL) identifying the ACL assigned to
selected interface and direction.
Sequence Number The sequence number signifying the order of the specified ACL relative
to other ACLs assigned to selected interface and direction.