User Manual

Configure System Information
74
M4200 and M4300 Series ProSAFE Managed Switches Web Management User Manual
Note: If you attach a unit to a stack and its template does not match the
stack’s template, then the new unit automatically reboots using the
template used by the other stacking members. To avoid the automatic
reboot, first set the template to the SDM template used by existing
members of the stack. Then power off the new unit, attach it to the
stack, and power it on.
You can configure SDM template preferences for the switch.
 To configure the SDM Template Preference settings:
1. Launch a web browser.
2. Enter http://<ipaddress> in the web browser address field.
The login window opens.
3. Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
4. Click the Login button.
The System Information page displays.
5. Select System > Management > DNS > SDM Template Preference
6. Use SDM Next Template ID to configure the next active template.
It is active only after the next reboot. To revert to the default template after the next
reboot, use the Default option. Possible values are as follows:
• Default
• IPv4 Data Center Plus Generic
• Dual IPv4 and IPv6 Data Center Generic
• IPv4 Data Center Plus Native
• Dual IPv4 and IPv6 Data Center Native