User Guide

Supplemental Information
93
LTE Broadband 11n Wireless Router MBR1515
Factory Default Settings
Use the Restore Factory Settings button on the bottom of your router to reset all settings to
their original factory default settings. This action is called a hard reset. To perform a hard
reset, press and hold the Restore Factory Settings button for 6 seconds. Your router
returns to the factory configuration settings that are shown in the following table.
Feature Default Behavior
Router
login
User login URL http://192.168.0.1
User name (case-sensitive) admin
Login password (case-sensitive) password
Internet
co
nnection
WAN MAC address Use default address
WAN MTU size 1500
Port speed AutoSense
Local
network
(L
AN)
LAN IP www.routerlogin.net
Subnet mask 255.255.255.0
RIP direction None
RIP version Disabled
RIP authentication None
DHCP server Enabled
DHCP starting IP address 192.168.0.2
DHCP ending IP address 192.168.0.254
DMZ Disabled
Firewall Inbound communication from the
In
ternet
Disabled (except traffic on port 80, the HTTP port)
Outbound communication to the
Internet)
Enabled (all)
Source MAC filtering Disabled
Broadband
se
ttings
Internet connection mode Always use Mobile Broadband Connection
Mobile
broad
band
Internet service provider Verizon
APN vzwinternet
Access Number *99***3#
PDP type IPV4V6
User name None required