Mobile Broadband Wireless-N Router MBRN3000 User Manual 350 East Plumeria Drive San Jose, CA 95134 USA June 2010 202-10578-01 v1.
Mobile Broadband Wireless-N Router MBRN3000 © 2010 NETGEAR, Inc.© 2010 by NETGEAR, Inc. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means without the written permission of NETGEAR, Inc. Part Number 202-10578-01 v1.0 Technical Support When you register your product at http://www.netgear.
Table of Contents Chapter 1 Connecting to the Internet Hardware Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Router Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Router Back Panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Router Label . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Using the Router Stand . . . . . . .
Mobile Broadband Wireless-N Router MBRN3000 Restoring the Configuration from a File . . . . . . . . . . . . . . . . . . . . . . . . .31 Erasing the Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31 Upgrading the Router Firmware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31 Router Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33 Showing Statistics. . . . . . . . . . . . . . . . . . . . . . . . .
Mobile Broadband Wireless-N Router MBRN3000 Appendix A Factory Default Settings and Technical Specifications Factory Default Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63 Technical Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1. Connecting to the Internet 1 This chapter describes how to configure your NETGEAR Mobile Broadband Wireless-N Router MBRN3000 Internet connection. For help with installation, see the Mobile Broadband Wireless-N Router MBRN3000 Installation Guide. Hardware Features Router Front Panel The router front panel shown below contains status LEDs. Power LAN Ports (1-4) USB Internet Wireless WPS Figure 1 Front panel You can use the LEDs to verify status and connections.
Mobile Broadband Wireless-N Router MBRN3000 Table 1. LED and Front Panel Button Descriptions LED Power LED Activity Description Solid green Solid green. Power is supplied to the router. Solid Red POST (Power-On Self-Test) failure or device malfunction Off Power is not supplied to the router Restore Factory Settings Press button for 6 seconds. Power LED lights briefly. When button released, the LED blinks red three times and then turns green as the gateway resets to the factory defaults.
Mobile Broadband Wireless-N Router MBRN3000 Router Back Panel The back panel of the router contains port connections. USB port for Ethernet LAN ports USB docking cable Power On/Off Power adapter input button Figure 2 Back panel Router Label The label on the bottom of the router shows the router’s MAC address, serial number, security PIN, and factory default login information. Restore Factory Settings: Press for 6 seconds.
Mobile Broadband Wireless-N Router MBRN3000 Using the Router Stand You can use the stand to position your router upright. 1. Insert the tabs of the stand into the slots on the bottom of your router. 2. Place your router near an AC power outlet in a location where you can connect cables as needed for your home network. Logging In to Your Router When you first connect to your router during installation, a Setup Wizard appears.
Mobile Broadband Wireless-N Router MBRN3000 To log in to the router: 1. Type http://www.routerlogin.net in the address field of your browser, and then press Enter. A login window displays: 2. Enter admin for the user name and your password (or the default, password). For information about how to change the password, see “Changing the Built-In Password” on page 23. Note: If you changed your password and do not remember what it is, you can restore the router to its factory settings.
Mobile Broadband Wireless-N Router MBRN3000 Accessing the Setup Wizard After Installation 1. Log in to the router as described in “Logging In to Your Router” on page 9. 2. Select Setup Wizard: 3. Click Next. The Setup Wizard prompts you to set up your Internet connection and wireless network as described in the Mobile Broadband Wireless-N Router MBRN3000 Installation Guide. Manually Configuring Your Internet Settings In order to connect to the network, and active broadband service account is required.
Mobile Broadband Wireless-N Router MBRN3000 Table 2. Broadband Settings fields Fields and Checkboxes Description Username Internet account login username Password Internet account password for authentication PIN code Pin code of the SIM card, where applicable Network name/APN ISP network name PDP type Type of packet data protocol Connect automatically at startup If this checkbox is selected, the modem automatically connects to the network when powered up.
2. Wireless Network Configuration 2 For a wireless connection, the SSID, also called the wireless network name, and the wireless security setting must be the same for the router and wireless computers or wireless adapters. NETGEAR strongly recommends that you use wireless security. Note: Computers can connect wirelessly at a range of several hundred feet. If you do not use wireless security, this can allow others outside of your immediate area to access your network.
Mobile Broadband Wireless-N Router MBRN3000 Wireless Placement and Range Guidelines The range of your wireless connection can vary significantly based on the physical placement of the router. The latency, data throughput performance, and notebook power consumption of wireless adapters also vary depending on your configuration choices. For best results, place your router according to the following guidelines: • Near the center of the area in which your PCs will operate.
Mobile Broadband Wireless-N Router MBRN3000 There are several ways you can enhance the security of your wireless network: Figure 4 Wireless Security • Restrict Access Based on MAC Address. You can allow only trusted PCs to connect so that unknown PCs cannot wirelessly connect to the router. Restricting access by MAC address adds an obstacle against unwanted access to your network, but the data broadcast over the wireless link is fully exposed.
Mobile Broadband Wireless-N Router MBRN3000 To view or manually configure the wireless settings: 1. Log in to the router as described in “Logging In to Your Router” on page 9. 2. Select Wireless Settings from the main menu. The settings for this screen are explained in Table 3. 3. Select the region in which the router will operate. 4. For initial configuration and test, leave the other settings unchanged. 5. To save your changes, click Apply. 6. Configure and test your computers for wireless connectivity.
Mobile Broadband Wireless-N Router MBRN3000 Table 3. Wireless Settings (Continued) Settings Description Security Options None You can use this setting to establish wireless connectivity before implementing wireless security. NETGEAR strongly recommends that you implement wireless security. WEP Use encryption keys and data encryption for data security. You can select 64-bit or 128-bit encryption. See Configuring WEP. WPA-PSK (TKIP) Allow only computers configured with WPA to connect to the router.
Mobile Broadband Wireless-N Router MBRN3000 Configuring WEP Note: If you use a wireless computer to configure wireless security settings, you will be disconnected when you click Apply. Reconfigure your wireless computer to match the new settings, or access the router from a wired computer to make further changes. To configure WEP data encryption: 1. Log in to the router as described in “Logging In to Your Router” on page 9. 2.
Mobile Broadband Wireless-N Router MBRN3000 points in your network. Enter 10 hexadecimal digits (any combination of 0–9, a–f, or A–F). 7. Select which of the four keys will be the default. Data transmissions are always encrypted using the default key. The other keys can be used only to decrypt received data. The four entries are disabled if WPA-PSK or WPA authentication is selected. 8. Click Apply to save your settings. Configuring WPA, WPA2, or WPA + WPA2 Both WPA and WPA2 provide strong data security.
Mobile Broadband Wireless-N Router MBRN3000 • NETGEAR’s Push 'N' Connect feature is based on the WPS standard. All other Wi-Fi-certified and WPS-capable products should be compatible with NETGEAR products that implement Push 'N' Connect. • If your wireless network will include a combination of WPS capable devices and non-WPS capable devices, NETGEAR suggests that you set up your wireless network and security settings manually first, and use WPS only for adding WPS capable devices.
Mobile Broadband Wireless-N Router MBRN3000 To access the Internet from any computer connected to your router, launch a browser such as Microsoft Internet Explorer or Mozilla Firefox. You should see the router’s Internet LED blink, indicating communication to the ISP. Note: If no WPS-capable client devices are located during the 2-minute time frame, the SSID does not chnage, and no security is set up. WPS PIN Entry Any wireless computer or device that will connect to the router wirelessly is a client.
Mobile Broadband Wireless-N Router MBRN3000 Adding Wireless Computers that Do Not Support WPS If you set up your network with WPS, and now you want to add a computer that does not support WPS, you must manually configure that computer. To view the wireless settings for the router, see “Manually Configuring Your Wireless Settings” on page 15. Because WPA randomly creates the SSID and WPA/WPA2 keys, they might be difficult to type or remember (that is one reason why the network is so secure).
3. Protecting Your Network 3 This chapter describes how to use the basic firewall features of the router to protect your network. Note: For information about the advanced content filtering features port forwarding and port triggering, see “Port Forwarding and Port Triggering” on page 46. Protecting Access to Your Mobile Broadband Wireless-N Router For security reasons, the router has its own user name and password. Also, after a period of inactivity, the login automatically disconnects.
Mobile Broadband Wireless-N Router MBRN3000 Default Configuration and Password” on page 62. 2. From the main menu, under the Maintenance heading, select Set Password: 3. To change the password, first enter the old password, and then enter the new password twice. 4. Click Apply to save your changes. Note: After changing the password, you must log in again to continue the configuration.
Mobile Broadband Wireless-N Router MBRN3000 • Blocking unwanted traffic from the Internet to your LAN. The router allows you to restrict access to Internet content based on Web addresses and Web address keywords. 1. Log in to the router as described in “Logging In to Your Router” on page 9. 2. On the main menu, select Block Sites to display the Block Sites screen: 3. To enable keyword blocking, select one of the following: • Per Schedule.
Mobile Broadband Wireless-N Router MBRN3000 5. To delete a keyword or domain, select it from the list, click Delete Keyword, and then click Apply. 6. To specify a trusted user, enter that computer’s IP address in the Trusted IP Address field, and then click Apply. You can specify one trusted user, which is a computer that will be exempt from blocking and logging. Since the trusted user will be identified by an IP address, you should configure that computer with a fixed IP address. 7.
Mobile Broadband Wireless-N Router MBRN3000 4. Click Add and the following screen displays: 5. Either select a service from the Service Type drop-down list, or use the Service/Type User Defined field to create a custom service. 6. Click Add to create the service, and it will be listed in the Service Table on the Block Services screen. 7. Click Apply to save your settings.
Mobile Broadband Wireless-N Router MBRN3000 2. On the main menu below Content Filtering, select Schedule: 3. Select your time zone. This setting will be used for the blocking schedule according to your local time zone and for time-stamping log entries. If your time zone is currently in daylight savings time, select the Automatically adjust for daylight savings time check box. 4. Click Apply to save your settings.
Mobile Broadband Wireless-N Router MBRN3000 protect you from identity theft and scams, Live Parental Control blocks up to 50 categories of Internet content. Live Parental Controls is an excellent solution for keeping your family safe online, but like all Web filtering tools, it isn't perfect.
4. Managing Your Network 4 This chapter describes how to perform network management tasks with your Mobile Broadband Wireless-N Router. Backing Up, Restoring, or Erasing Your Settings The configuration settings of the router are stored in a configuration file in the router. This file can be backed up to your computer, restored, or reverted to factory default settings. The procedures below explain how to do these tasks. Backing Up the Configuration to a File 1. Log in to the router. Type http://www.
Mobile Broadband Wireless-N Router MBRN3000 Restoring the Configuration from a File To restore the configuration: 1. Log in to the router. Type http://www.routerlogin.net in the address field of your Internet browser. Enter admin for the user name and your password (or the default, password). 2. Under the Maintenance heading on the main menu, select Backup Settings. 3. Enter the full path to the file on your network, or click Browse to locate the file. 4. When you have located the .
Mobile Broadband Wireless-N Router MBRN3000 The Web browser used to upload new firmware into the router must support HTTP uploads. NETGEAR recommends using Microsoft Internet Explorer 5.0 or newer, or Mozilla Firefox 2.0 or newer. 2. Log in to the router. Type http://www.routerlogin.net in the address field of your Internet browser. Enter admin for the user name and your password (or the default, password). 3.
Mobile Broadband Wireless-N Router MBRN3000 Router Status From the main menu, below the Maintenance heading, select Router Status to view this screen. You can use this screen to view the status of the router, to show statistics, or to view the connection status. • For information about the fields on this screen, see Table 4. • See “Showing Statistics” on page 35 for information about statistics. • For information about the Internet connection, see “Connection Status” on page 36 Table 4.
Mobile Broadband Wireless-N Router MBRN3000 Table 4. Router Status Fields (Continued) Field WAN Port Description Connection Status The status of the Internet connection. IP Address The IP address used by the modem. If no address is shown, the router cannot connect to the Internet. Protocol The protocol for the Internet connection, which is PPP (Point-to-Point). IP Subnet Mask The IP subnet mask used by the router’s USB port. Gateway IP Address The IP address used by the router.
Mobile Broadband Wireless-N Router MBRN3000 Showing Statistics Click the Show Statistics button on the Router Status screen to display router usage statistics: This following table explains the statistic fields. Table 5. Router Statistics Fields Field Description Status The link status. Note that LAN2, LAN3, and LAN4 are guest networks. TxPkts The number of packets transmitted on this port since reset or manual clear. RxPkts The number of packets received on this port since reset or manual clear.
Mobile Broadband Wireless-N Router MBRN3000 Connection Status Click the Connection Status button on the Router Status screen: This screen shows the following statistics: Table 6. Connection Status Fields for HSDPA Status Field Description Connection Status The status of the Internet connection. • Scanning. The modem is scanning for broadband wireless networks in your area. • Connected. The router is connected to the Internet. • No USB Device Attached.
Mobile Broadband Wireless-N Router MBRN3000 Viewing Attached Devices The Attached Devices screen shows all IP devices that the router discovered on the local network. From the main menu, under the Maintenance heading, select Attached Devices: For each device, the table shows the IP address, device name if available, and the Ethernet MAC address. If the router is rebooted, this data is lost until the router rediscovers the devices. To force the router to look for attached devices, click the Refresh button.
Mobile Broadband Wireless-N Router MBRN3000 Log entries and action buttons are described in the following table. Table 7. Security Log Entry and Button Descriptions Field or button Description Current time The date and time the log entry was recorded. Description or action The type of event and what action was taken if any. Source IP The IP address of the initiating device for this log entry.
Mobile Broadband Wireless-N Router MBRN3000 Activation and Administration Tue, 2002-05-21 18:48:39 - NETGEAR activated [This entry indicates a power-up or reboot with initial time entry.] Tue, 2002-05-21 18:55:00 - Administrator login successful - IP:192.168.0.2 Thu, 2002-05-21 18:56:58 - Administrator logout - IP:192.168.0.2 [This entry shows an administrator logging in and out from IP address 192.168.0.2.] Tue, 2002-05-21 19:00:06 - Login screen timed out - IP:192.168.0.
Mobile Broadband Wireless-N Router MBRN3000 To receive alerts and logs by e-mail: 1. Select the Turn E-mail Notification On check box. 2. Fill in the fields to send alerts and logs through email. • Your Outgoing Mail Server. Enter the name or IP address of the outgoing SMTP mail server of your ISP (such as mail.myISP.com). • Send to This E-mail Address. Enter the e-mail address where you want to send the alerts and logs. Use a full e-mail address, such as ChrisXY@myISP.com.
Mobile Broadband Wireless-N Router MBRN3000 • Display the routing table to identify what other routers the router is communicating with. • Reboot the router to enable new network configurations to take effect or to clear problems with the router’s network connection. From the main menu, under the Maintenance heading, select Diagnostics: • Ping: Ping an IP address. • Lookup: A DNS (Domain Name Server) converts the Internet name such as www.netgear.com to an IP address.
Mobile Broadband Wireless-N Router MBRN3000 Tip: Be sure to change the router default password to a very secure password. The ideal password should contain no dictionary words from any language, and should be a mixture of letters (both upper-case and lower-case), numbers, and symbols. Your password can be up to 30 characters. Configuring Remote Management 1. Log in to the router. Type http://www.routerlogin.net in the address field of your Internet browser.
5. Advanced 5 This chapter describes how to configure the advanced features of your Mobile Broadband Wireless-N Router. Advanced Wireless Settings From the main menu, select Advanced Wireless Settings to display the following screen: Table 8. Advanced Wireless Settings Field Description Enable Wireless Router Radio Selected by default, this setting enables the wireless radio, which allows the router to work as a wireless access point.
Mobile Broadband Wireless-N Router MBRN3000 Table 8. Advanced Wireless Settings (Continued) Field Description Router PIN The PIN number used for Push 'N' Connect. Disable Router PIN By default, this check box is cleared. This allows the WPS clients to discover the router’s PIN. Keep Wireless Settings By default, this check box is cleared. This allows the router to automatically generate the SSID and WPA/WPA2 security settings when it implements WPS.
Mobile Broadband Wireless-N Router MBRN3000 Restricting Access by MAC Address For increased security, you can restrict access to the wireless network to allow only specific PCs based on their MAC addresses. You can restrict access to only trusted PCs so that unknown PCs cannot wirelessly connect to the Mobile Broadband Wireless-N Router. MAC address filtering adds an obstacle against unwanted access to your network, but the data broadcast over the wireless link is fully exposed.
Mobile Broadband Wireless-N Router MBRN3000 Port Forwarding and Port Triggering Port forwarding and port triggering are advanced features that affect the behavior of the firewall in your router.
Mobile Broadband Wireless-N Router MBRN3000 Port Triggering To set up port triggering: 1. From the main menu, under the Advanced Heading, select Port Forwarding/Port Triggering. 2. Select the Port Triggering radio button to display the following screen: 3. Click Add Service and fill in the fields in the Add Service screen. The service appears in the list. For more detailed information, see the Port Forwarding/Port Triggering help.
Mobile Broadband Wireless-N Router MBRN3000 Table 9. WAN Setup Settings Setting Description Disable SPI Firewall This check box is usually clear so that the firewall protects your LAN against port scans and denial of service (DOS) attacks. This check box should be selected only in special circumstances. Default DMZ Server This feature is sometimes helpful when you are using some online games and videoconferencing.
Mobile Broadband Wireless-N Router MBRN3000 To assign a computer or server to be a default DMZ server: 1. Go to the WAN Setup screen as described in the previous section. 2. Select the Default DMZ Server check box. 3. Type the IP address for that server. 4. Click Apply to save your changes. LAN IP Settings The LAN IP Setup screen allows configuration of LAN IP services such as DHCP and RIP. These features can be found under the Advanced heading in the router main menu.
Mobile Broadband Wireless-N Router MBRN3000 Table 10. LAN IP Setup Settings Description Device Name LAN TCP/IP Setup IP Address The LAN IP address of the router. IP Subnet Mask The LAN subnet mask of the router. Combined with the IP address, the IP Subnet Mask allows a device to know which other addresses are local to it, and which must be reached through a gateway or router. Use Router as a DHCP DHCP Server Server For more information, see “DHCP Starting IP Address Settings” on page 50.
Mobile Broadband Wireless-N Router MBRN3000 The router delivers the following parameters to any LAN device that requests DHCP: • An IP address from the range you have defined. • Subnet mask. • Gateway IP Address is the router’s LAN IP address. • Primary DNS server, if you entered a primary DNS address in the Basic Settings screen; otherwise, the router’s LAN IP address. • Secondary DNS server, if you entered a secondary DNS address in the Basic Settings screen.
Mobile Broadband Wireless-N Router MBRN3000 Dynamic DNS If your network has a permanently assigned IP address, you can register a domain name and have that name linked with your IP address by public Domain Name Servers (DNS). However, if your Internet account uses a dynamically assigned IP address, you will not know in advance what your IP address will be, and the address can change frequently.
Mobile Broadband Wireless-N Router MBRN3000 6. If your dynamic DNS provider allows the use of wildcards in resolving your URL, you can select the Use wildcards check box to activate this feature. For example, the wildcard feature will cause *.yourhost.dyndns.org to be aliased to the same IP address as yourhost.dyndns.org. 7. Click Apply to save your configuration. Using Static Routes Static routes provide additional routing information to your router.
Mobile Broadband Wireless-N Router MBRN3000 To configure static routes: 1. From the main menu, under the Advanced heading, select Static Routes to view the Static Routes screen: 2. Click Add or Edit to display the following screen: 3. Fill in or change the fields: • Route Name. The route name is for identification purposes only. • Private. Select this check box if you want to limit access to the LAN only. The static route will not be reported in RIP. • Active.
Mobile Broadband Wireless-N Router MBRN3000 1. Select UPnP on the main menu to display the UPnP screen: 2. Fill in the settings on the UPnP screen: • Turn UPnP On. UPnP can be enabled or disabled for automatic device configuration. The default setting for UPnP is enabled. If disabled, the router will not allow any device to automatically control the resources, such as port forwarding (mapping), of the router. • Advertisement Period.
Mobile Broadband Wireless-N Router MBRN3000 To monitor traffic on your router: 1. Under the Advanced heading on the router menu, select Traffic Meter. 2. To enable the Traffic Meter, select the Enable Traffic Meter check box. 3. If you would like to record and restrict the volume of Internet traffic, select the Traffic volume control by radio button. You can select one of the following options for controlling the traffic volume: • No Limit. No restriction is applied when the traffic limit is reached.
6. Troubleshooting 6 This chapter gives information about troubleshooting your Mobile Broadband Wireless-N Router. After each problem description, instructions are provided to help you diagnose and solve the problem. For the common problems listed, go to the section indicated. • Is the router on? • Have I connected the router correctly? Go to “Basic Functioning” on page 57. • I can’t access the router’s configuration with my browser. Go to “Troubleshooting Access to the Router Main Menu” on page 58.
Mobile Broadband Wireless-N Router MBRN3000 If any of these conditions does not occur, refer to the following table. Table 11. Troubleshooting with the LEDs LED Action Power LED is off. • Make sure that the power cord is properly connected to your • • router and that the power supply adapter is properly connected to a functioning power outlet. Check that you are using the power adapter supplied by NETGEAR for this product.
Mobile Broadband Wireless-N Router MBRN3000 • Make sure your computer’s IP address is on the same subnet as the router. If you are using the recommended addressing scheme, your computer’s address should be in the range of 192.168.0.2 to 192.168.0.254. See the online document listed in "Internet Networking and TCP/IP Addressing: " in Appendix B to find your computer’s IP address. Note: If your computer’s IP address is shown as 169.254.x.
Mobile Broadband Wireless-N Router MBRN3000 Troubleshooting Internet Browsing If your router can obtain an IP address but your computer is unable to load any Web pages from the Internet: • The Traffic meter is enabled and the limit might have been reached. By configuring the traffic meter to not block, you can resume Internet access. If you have an usage limit, your ISP may charge you for the overage. • Your computer might not recognize any DNS server addresses.
Mobile Broadband Wireless-N Router MBRN3000 Pinging with 32 bytes of data If the path is working, you see this message: Reply from < IP address >: bytes=32 time=NN ms TTL=xxx If the path is not working, you see this message: Request timed out If the path is not working correctly, you could have one of the following problems: • • Wrong physical connections - Make sure that the LAN port LED is on. If the LED is off, follow the instructions in Table 11 on page 58.
Mobile Broadband Wireless-N Router MBRN3000 broadband modem, but some ISPs additionally restrict access to the MAC address of a single PC connected to that modem. If this is the case, you must configure your router to clone or spoof the MAC address from the authorized PC. See the Mobile Broadband Wireless-N Router MBRN3000 Installation Guide.
A. Factory Default Settings and Technical Specifications A Factory Default Settings You can use the Restore Factory Settings button located on the bottom of your router to reset all settings to their factory defaults. This is called a hard reset. To perform a hard reset, push and hold the Restore Factory Settings button for 6 seconds. Your router will return to the factory configiuration settings that are shown in the following table. Feature Router login Default Behavior User login URL http://www.
Mobile Broadband Wireless-N Router MBRN3000 Feature (Continued) Default Behavior (Continued) Firewall Inbound communication from the Internet Disabled (except traffic on port 80, the http port) Outbound communication to the Internet) Enabled (all) Source MAC filtering Disabled Wireless communication Enabled SSID name NETGEAR Security Disabled Broadcast SSID Enabled Transmission speed Auto1 Country/Region United States (in North America; otherwise, varies by region) RF channel Auto Op
Mobile Broadband Wireless-N Router MBRN3000 Technical Specifications Technical Specifications Network Protocol and Standards Compatibility TCP/IP, DHCP Power adapter • • • • • Physical specifications • Dimensions: 6.8" x 5.03" x 1.28" (173 mm x 128 mm x 33 mm) • Weight: 0.65 lbs. without the stand (0.
B. Related Documents B This appendix provides links to reference documents you can use to gain a more complete understanding of the technologies used in your NETGEAR product. Document Link Windows XP and Vista Wireless Configuration Utilities Application Note http://documentation.netgear.com/reference/enu/winzerocfg/index.htm Internet Networking and TCP/IP Addressing: http://documentation.netgear.com/reference/enu/tcpip/index.htm Wireless Communications: http://documentation.netgear.
C. Notification of Compliance C Regulatory Compliance Information Note: This section includes user requirements for operating this product in accordance with National laws for usage of radio spectrum and operation of radio devices. Failure of the end-user to comply with the applicable requirements may result in unlawful operation and adverse action against the end-user by the applicable National regulatory authority.
Mobile Broadband Wireless-N Router MBRN3000 EDOC in Languages of the European Community Cesky [Czech] NETGEAR Inc. tímto prohlašuje, že tento Radiolan je ve shode se základními požadavky a dalšími príslušnými ustanoveními smernice 1999/5/ES. Dansk [Danish] Undertegnede NETGEAR Inc. erklærer herved, at følgende udstyr Radiolan overholder de væsentlige krav og øvrige relevante krav i direktiv 1999/5/EF. Deutsch [German] Hiermit erklärt NETGEAR Inc.
Mobile Broadband Wireless-N Router MBRN3000 Português [Portuguese] NETGEAR Inc. declara que este Radiolan está conforme com os requisitos essenciais e outras disposições da Directiva 1999/5/CE. Slovensko [Slovenian] NETGEAR Inc. izjavlja, da je ta Radiolan v skladu z bistvenimi zahtevami in ostalimi relevantnimi določili direktive 1999/5/ES. Slovensky [Slovak] NETGEAR Inc. týmto vyhlasuje, že Radiolan spĺňa základné požiadavky a všetky príslušné ustanovenia Smernice 1999/5/ES.
Mobile Broadband Wireless-N Router MBRN3000 FCC Radio Frequency Interference Warnings & Instructions This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Index A access 3-23 restricting by MAC address 2-15, 5-45 router password 3-23 access control 5-44 B backup configuration 4-30 blocking keywords 3-24 services 3-26 sites 3-24 broadband settings 1-11, 1-12 C configuration backup 4-30 erasing 4-31 D date and time, troubleshooting 6-62 daylight savings time 3-28, 6-62 Denial of Service (DoS) protection 3-24 DHCP 5-50 DMZ server 5-48 default 5-48 Dynamic DNS 5-52 F factory settings, restoring 4-31 filtering 3-28 Firmware Upgrade Assistant 1-10 FLASH memory
Mobile Broadband Wireless-N Router MBRN3000 restore factory settings 4-31 Restore Factory Settings button 1-8 roaming 1-12 router back panel 1-8 router front panel 1-6 LEDs 1-7 Wireless button 1-7 WPS button 1-7 router label 1-8 router stand 1-9 S serial number, location of 1-8 Setup Wizard 1-11 SMTP 4-40 SSID 2-15 Syslog 4-38 T TCP/IP network troubleshooting 6-60 time of day 6-62 time zone 3-28 timeout, administrator login 3-24 time-stamping 3-28 Traffic Control 5-56 Traffic Counter 5-56 traffic meterin
