Owner's Manual
Table Of Contents
- User Manual
- Contents
- 1. Get Started
- 2. Connect to the Mobile Router
- 3. Manage Battery Usage and Charging
- 4. Manage Your Internet Connection
- 5. Control Internet Access
- 6. Specify Mobile Router Network Settings
- 7. Share Media and Storage
- 8. Manage Your Mobile Router Network
- View the Network Status
- View Mobile Router Device Status
- View WiFi Details
- View a Network Map
- View Connected Devices
- Update the Mobile Router Firmware
- Change the admin Password
- Manage SMS Messages
- Manage the LED Settings
- Back Up and Restore the Mobile Router Settings
- Factory Reset
- Reboot the Mobile Router
- Power Off the Mobile Router
- View Details About Your Mobile Router
- 9. Frequently Asked Questions
- Why can’t my device connect to the mobile router?
- Why can’t I access the Internet?
- Why is the signal indicator always low?
- Why is the download or upload speed slow?
- What do I do if I forget my admin login password?
- How do I disconnect from the mobile broadband network?
- The LCD is not lit. How do I know if the mobile router is still powered on?
- How do I find my computer’s IP address?
- How do I find a device’s MAC address?
- Where can I find more information?
- 10. Troubleshooting
- A. Specifications
- Quick Start Guide
- Product Info
band.You might want to use this feature if you are in an area in which many others are using cellular
connections at the same time or in areas with poor cellular reception.
During Ethernet offloading, you can use the micro USB port for AC charging and you can use the USB type
A port to jump boost a device or to connect a USB device
Figure 5. Ethernet offloading with AC charging and a USB storage device
If you want to use a tethered connection and offload, use WiFi offloading. If you do use WiFi offloading, you
must configure the mobile router for 2.4 GHz access only. Dual-band access is not supported for WiFi
offloading.
You cannot use an Ethernet connection and a tethered connection at the same time
Figure 6. Tethered access is not supported during Ethernet offloading
Enable Data Offloading From the NETGEAR Mobile App
To enable data offloading from the NETGEAR mobile app:
1. Launch the NETGEAR Mobile app on your smartphone.
2. Swipe down.
The dashboard displays.
3.
Tap Offloading.
The Offloading page displays.
4. Select WiFi.
The Offloading page displays a list of WiFi networks in your area.
5. To connect to a network on the list, do the following:
Manage Your Internet Connection
31
Nighthawk LTE Mobile Hotspot Router Model MR1100