Owner's Manual

Turn Off USB Tethering From a Web Browser
To turn off tethering:
1. From a computer that is connected to your network, launch a web browser.
2. Enter http://192.168.1.1.
A login page displays.
3. Enter the administrator login password.
The password is case-sensitive.
The dashboard displays.
4. Select SETTINGS > Setup > Router Setup.
The Router Setup page displays.
5. In the Use USB port for section, select Charge only.
6. Click the Apply button.
Your settings are saved.
Manage Website Filters
You can set up a filter to block or allow access to websites that you specify.You can also set up a list of
devices that are unrestricted. The website filtering does not apply to unrestricted devices.
To set up a website filter:
1. From a computer that is connected to your network, launch a web browser.
2. Enter http://192.168.1.1.
A login page displays.
3. Enter the administrator login password.
The password is case-sensitive.
The dashboard displays.
4. Select SETTINGS > Security > Website Filters.
The Website Filters page displays.
5. Select the Enable check box.
6. In the Filter Type menu, select Block List or Allow List.
Depending on your selection, a Blocked Websites list or an Allowed Websites list displays.
7. To add a website to the list, click the ADD button and enter the website.
The website is added to the list.
8. To edit an entry in the list, do the following:
Control Internet Access
41
Nighthawk LTE Mobile Hotspot Router Model MR1100