Owner's Manual

The Wireless Network page displays the settings for the 2.4 GHz and the 5 GHz WiFi bands and global
WiFi settings.
5. Change the settings as needed.
By default, the Broadcast WiFi Name SSID check box is selected for each network so that the WiFi
network name displays in the list of WiFi networks for computers or mobile devices.
6. To change the global WiFi settings, adjust the WiFi standby time or the WiFi range.
7. Click the Apply button.
Your settings are saved.
When you change your profile options (including disabling or enabling either WiFi network), any devices
connected to the mobile router are disconnected and might need to be reconnected.
Use WPS to Connect to the Mobile Router WiFi Network
To connect to the mobile router WiFi network, you can find the network and connect or you can use WPS.
If the device is WPS enabled, you can use the WPS method to connect the device without using the WiFi
password.
Use WPS From the NETGEAR Mobile App
To add a WPS-enabled WiFi device from the NETGEAR Mobile app:
1. On your smartphone, connect to the mobile router’s WiFi network.
2. Launch the NETGEAR Mobile app.
3. Swipe down.
The dashboard displays.
4.
Tap WiFi.
The WiFi page displays.
5. Tap WPS.
6. Within two minutes, tap or click the WPS button on the mobile device or computer that you want to
connect.
Your mobile router and the mobile device or computer communicate and establish the connection.
Use WPS From a Web Browser
To add a WPS-enabled WiFi device from the mobile router web page:
1. From a computer that is connected to your network, launch a web browser.
2. Enter Enter http://192.168.1.1.
A login page displays.
3. Enter the administrator login password.
Specify Mobile Router Network Settings
51
Nighthawk LTE Mobile Hotspot Router Model MR1100