Owner's Manual
Table Of Contents
- User Manual
- Contents
- 1. Get Started
- 2. Connect to the Mobile Router
- 3. Manage Battery Usage and Charging
- 4. Manage Your Internet Connection
- 5. Control Internet Access
- 6. Specify Mobile Router Network Settings
- 7. Share Media and Storage
- 8. Manage Your Mobile Router Network
- View the Network Status
- View Mobile Router Device Status
- View WiFi Details
- View a Network Map
- View Connected Devices
- Update the Mobile Router Firmware
- Change the admin Password
- Manage SMS Messages
- Manage the LED Settings
- Back Up and Restore the Mobile Router Settings
- Factory Reset
- Reboot the Mobile Router
- Power Off the Mobile Router
- View Details About Your Mobile Router
- 9. Frequently Asked Questions
- Why can’t my device connect to the mobile router?
- Why can’t I access the Internet?
- Why is the signal indicator always low?
- Why is the download or upload speed slow?
- What do I do if I forget my admin login password?
- How do I disconnect from the mobile broadband network?
- The LCD is not lit. How do I know if the mobile router is still powered on?
- How do I find my computer’s IP address?
- How do I find a device’s MAC address?
- Where can I find more information?
- 10. Troubleshooting
- A. Specifications
- Quick Start Guide
- Product Info
Manage Shared Storage Devices
You can insert a USB storage device in the mobile router USB type A port and you can install a micro SD
card in the mobile router.You can access the files and folders on these devices from computers and mobile
devices that are connected to the mobile router network.
USB Device Requirements
The mobile router works with most USB-compliant external flash and hard drives. Some USB external hard
drives and flash drives require you to load the drivers onto the computer before the computer can access
the USB device. Such USB devices do not work with the mobile router.
The mobile router supports the following file system types for full read/write access: FAT16, FAT32, NTFS,
HFS, and HFS+.
When you purchase a USB storage device, the package typically identifies its format. For information about
how to format a USB storage device using a Windows or Mac computer, consult the help instructions for
your computer or operating system.You might need to use a specific application to format a USB storage
device.
CAUTION:
Formatting a USB storage device erases all its content.
Connect a USB Storage Device
You can access and share a USB storage device connected to the mobile router USB type A port. (If your
storage device uses special drivers, it is not compatible.) You can continue use the micro USB port to charge
the mobile router or for a tethered connection.
Figure 8. USB storage and tethering connections
To connect a USB storage device:
1. Insert your USB storage drive into a USB port on the router.
2. If your USB device uses a power supply, connect it.
You must use the power supply when you connect the USB device to the router.
When you connect the USB device to the router USB port, it might take up to two minutes before it is
ready for sharing.
Share Media and Storage
57
Nighthawk LTE Mobile Hotspot Router Model MR1100