User Manual
Table Of Contents
- Contents
- 1. Get Started
- 2. Connect to the Mobile Hotspot
- 3. Manage Battery Usage and Charging
- 4. Manage Your Internet Connection
- 5. Control Internet Access
- 6. Specify Mobile Hotspot Network Settings
- 7. Manage Your Mobile Hotspot Network
- View the Network Information
- View Mobile Hotspot Network Status
- View WiFi Details
- View a Network Map
- View Connected Devices
- Update the Mobile Hotspot Firmware
- Change the admin Password
- Manage SMS Messages
- Back Up and Restore the Mobile Router Settings
- Factory Reset
- Reboot the Mobile Hotspot
- Power Off the Mobile Hotspot
- View Details About Your Mobile Router
- 8. Frequently Asked Questions
- Why can’t my device connect to the mobile hotspot?
- Why can’t I access the Internet?
- Why is the signal indicator always low?
- Why is the download or upload speed slow?
- What do I do if I forget my admin login password?
- How do I disconnect from the mobile broadband network?
- The LCD is not lit. How do I know if the mobile hotspot is still powered on?
- How do I find my computer’s IP address?
- How do I find a device’s MAC address?
- Where can I find more information?
- 9. Troubleshooting
- A. Specifications
Recharge the Battery From a Computer USB Port
To recharge the battery from the USB port on your computer:
Attach one end of the micro USB cable to the mobile hotspot and plug the other
end into the USB port on your computer.
The Battery icon on the LCD indicates that the battery is charging.
Note: The LCD goes into sleep mode after a set time to extend battery life. To wake
up the LCD, tap the Power button.
Use the USB Type C Cable to Charge Only
You can log in to the mobile hotspot and specify a setting so that the USB type C cable
is used only for charging and not to access the mobile hotspot using a web browser.
You might want to do this if you are using the Ethernet port and a wall socket is not
available to charge the mobile hotspot.
To specify a USB type C cable charge-only setting:
1. From a computer that is connected to your network, launch a web browser.
2.
Enter http://attwifimanager or http://192.168.1.1.
A login window opens.
3. Enter the router user name and password.
The user name is admin. The user name and password are case-sensitive.
The mobile hotspot dashboard displays.
4. Select Setup > Router Setup.
The Router Setup page displays.
User Manual25Manage Battery Usage and
Charging
Nighthawk 5G Mobile Hotspot Pro