User Manual
Table Of Contents
- Contents
- 1. Get Started
- 2. Connect to the Mobile Hotspot
- 3. Manage Battery Usage and Charging
- 4. Manage Your Internet Connection
- 5. Control Internet Access
- 6. Specify Mobile Hotspot Network Settings
- 7. Manage Your Mobile Hotspot Network
- View the Network Information
- View Mobile Hotspot Network Status
- View WiFi Details
- View a Network Map
- View Connected Devices
- Update the Mobile Hotspot Firmware
- Change the admin Password
- Manage SMS Messages
- Back Up and Restore the Mobile Router Settings
- Factory Reset
- Reboot the Mobile Hotspot
- Power Off the Mobile Hotspot
- View Details About Your Mobile Router
- 8. Frequently Asked Questions
- Why can’t my device connect to the mobile hotspot?
- Why can’t I access the Internet?
- Why is the signal indicator always low?
- Why is the download or upload speed slow?
- What do I do if I forget my admin login password?
- How do I disconnect from the mobile broadband network?
- The LCD is not lit. How do I know if the mobile hotspot is still powered on?
- How do I find my computer’s IP address?
- How do I find a device’s MAC address?
- Where can I find more information?
- 9. Troubleshooting
- A. Specifications
Use WPS to Connect to the Mobile Router
WiFi Network
To connect to the mobile hotspot WiFi network, you can find the network and connect
or you can use WPS. If the device is WPS enabled, you can use the WPS method to
connect the device without using the WiFi password.
Use WPS From the Touch Screen
1. To wake the device, press the Power button.
2. Swipe up on the Home screen.
3. Tap WPS.
4. Within two minutes, tap Pair with SSID id.
Your mobile hotspot and the WiFi device communicate and establish the connection.
Use WPS From the NETGEAR Mobile App
To add a WPS-enabled WiFi device from the NETGEAR Mobile app:
1. On your smartphone, connect to the mobile hotspot’s WiFi network.
2. Launch the NETGEAR Mobile app.
3. Swipe down.
The dashboard displays.
4. Tap WiFi.
The WiFi page displays.
5. Tap WPS.
6. Within two minutes, tap or click the WPS Button Pairing or the Enter WPS pin
button on the mobile device or computer that you want to connect.
Your mobile hotspot and the mobile device or computer communicate and establish
the connection.
User Manual55Specify Mobile Hotspot Network
Settings
Nighthawk 5G Mobile Hotspot Pro