User Manual

Use WPS From a Web Browser
To add a WPS-enabled WiFi device from the mobile hotspot web page:
1. From a computer that is connected to your network, launch a web browser.
2.
Enter Enter http://attwifimanager or http://192.168.1.1.
A login page displays.
3. Enter the administrator login password.
The password is case-sensitive.
The dashboard displays.
4. Select Wireless.
The Wireless page displays.
5.
Click the WPS button for the network.
The WPS page displays.
6. Choose the WPS method that you want to use:
•
WPS button pairing. If the device that you want to connect includes a WPS
button, click the WPS button pairing button and, within two minutes
(120 seconds), press the device’s WPS button.
•
Enter WPS PIN. If a WPS pin is associated with the device that you want to
connect, click the Enter WPS PIN button and enter the device’s WPS PIN.
Your mobile hotspot and the wireless device communicate and establish the
connection.
Universal Plug-N-Play
Universal Plug N Play (UPnP) helps devices, such as Internet appliances and computers,
access the network and connect to other devices as needed. UPnP devices can
automatically discover the services from other registered UPnP devices on the network.
UPnP is beneficial when you use applications such as multiplayer gaming, peer-to-peer
connections, or real-time communications such as instant messaging or remote
assistance. By default, UPnP is enabled in the mobile hotspot.
Turn UPnP Off or On From the NETGEAR Mobile App
By default, UPnP is enabled in the mobile router, but you can disable and enable this
feature.
User Manual56Specify Mobile Hotspot Network
Settings
Nighthawk 5G Mobile Hotspot Pro