Operation Manual
Reference Manual for the Model MR814 Wireless Router
2-4 Setting Up the Hardware
The Router’s Rear Panel
The rear panel of the Model MR814 Wireless Router (Figure 2-2) contains port connections.
Figure 2-2. MR814 Rear Panel
Viewing right to left, the rear panel contains the following features:
• Wireless antenna
• Factory Default Reset push-button
• Internet Ethernet port for connecting the router to a cable or DSL modem
• Four Ethernet LAN ports for connecting the router to the local computers
• AC power adapter outlet
Connecting the Router
Before using your router, you need to do the following:
• Prepare your wireless devices as described below.
• Connect your local Ethernet network to the LAN port(s) of the router (see page 2-5).
• Connect your cable or DSL modem to the Internet port of the router (see page 2-5).
• Connect the power adapter (see page 2-6)
Note: The Resource CD included with your router contains an animated Installation Assistant to
help you through this procedure.
Preparing Wireless Connections
Rotate the antenna to a vertical position.