Operation Manual

Reference Manual for the Model MR814 Wireless Router
Maintenance 7-7
To erase the configuration, click the Erase button.
To restore the factory default configuration settings without knowing the login password or IP
address, you must use the Default Reset button on the rear panel of the router. See “Using the
Default Reset button“ on page 9-8.
Changing the Configuration Password
The default password for the router’s Web Configuration Manager is password. Netgear
recommends that you change this password to a more secure password.
From the Main Menu of the browser interface, under the Maintenance heading, select Set
Password to bring up the menu shown in Figure 7-6.
Figure 7-6. Set Password menu
To change the password, first enter the old password, and then enter the new password twice. Click
Apply.