User's Manual

Smart Managed Pro Switches MS510TX and MS510TXPP
Configure Switching User Manual133
If you do not know the IP address of the switch, see Access the Switch on page 14.
The login window opens.
4. Enter
the switch’s password in the Password field.
The default password is password.
The System Information page displays.
5. Select
Switching > Multicast > MFDB > MFDB Table.
The MFDB Table page displays.
6. In
the Search by MAC Address field, enter a MAC address.
Enter six two-digit hexadecimal numbers separated by colons, for example,
00:01:23:43:45:67.
7. Click
the Go button.
If the address exists, the entry is displayed. An exact match is required.
The following table displays the MFDB table information.
Table 34. MFDB table information
Field Description
MAC Address The multicast MAC address for which you requested data.
VLAN ID The VLAN ID to which the multicast MAC address is related.
Component The component through which the entry was added to the Multicast Forwarding
Database. Possible values are IGMP Snooping, Static Filtering, and MLD Snooping.
Type The type of the entry. Static entries are those that are configured by the end user
.
Dynamic entries are added to the table as a result of a learning process or protocol.
Description The text description of this multicast table entry. Possible values are Management
Configured, Network Configured, and Network
Assisted.
Interface The interfaces that are designated for forwarding (Fwd:) and filtering (Flt:) for the
selected address.
Forwarding Interfaces The resultant forwarding list is derived from combining all the forwarding interfaces
and removing the interfaces that are listed as the static filtering interfaces.
View the MFDB Statistics
To view the MFDB statistics:
1. Connect
your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is of
f-network using an Ethernet cable.
2. Launch a web browser.