User's Manual

Smart Managed Pro Switches MS510TX and MS510TXPP
Configure Switching User Manual134
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
Access the Switch on page 14.
The login window opens.
4. Enter
the switch’s password in the Password field.
The default password is password.
The System Information page displays.
5. Select Switching
> Multicast > MFDB > MFDB Statistics.
The MFDB Statistics page displays.
The following table describes the MFDB statistics fields.
Table 35. MFDB statistics information
Field Description
Max MFDB Table Entries The maximum number of entries that the Multicast Forwarding Database
table can hold.
Current Entries The current number of entries in the Multicast Forwarding Database table.
Configure Auto-Video
If the switch supports devices or applications running multicast traffic, the Auto-Video feature
simplifies IGMP snooping querier configuration, such as video surveillance cameras.
To configure auto-video settings:
1. Connect
your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is of
f-network using an Ethernet cable.
2. Launch a web browser.
3. In
the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
Access the Switch on page 14.
The login window opens.
4. Enter
the switch’s password in the Password field.
The default password is password.
The System Information page displays.
5. Select Switching>
Multicast > Auto-Video.
The Auto-Video Configuration page displays.
6. Select
one of the following radio buttons: