User's Manual

Smart Managed Pro Switches MS510TX and MS510TXPP
Configure Routing User Manual177
View the IPv6 Route Table
The IPv6 Route Table contains IPv6 routes that were statically added, IPv6 routes that were
discovered through the Neighbor Discovery (ND) protocol, and IPv6 routes that were derived
from manually added IPV6 addresses.
To view the IPv6 Route Table:
1. Connect
your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is of
f-network using an Ethernet cable.
2. Launch a web browser.
3. In
the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
Access the Switch on page 14.
The login window opens.
4. Enter
the switch’s password in the Password field.
The default password is password.
The System Information page displays.
5. Select Routing>
IPv6 > Basic > Route Table.
6. To specify which type of routes to display in the IPv6 Route Table, from the Routes
Displayed menu, select one of the following options:
• All Routes. Show all active IPv6 routes.
• All Static Routes. Show only the manually configured routes.
7. T
o refresh the page with the latest information about the switch, click the Refresh button.