User's Manual

Smart Managed Pro Switches MS510TX and MS510TXPP
Manage Device Security User Manual230
4. Enter the switch’s password in the Password field.
The default password is password.
The System Information page displays.
5. Select Security > Management Security > Authentication List > HTTP Authentication
List.
The HTTP Authentication List page displays.
6. Select the check box for the httpList name.
7. From the menu in the 1 column, select the authentication method that must be used first in
the selected authentication login list.
If you select a method that does not time out as the first method, such as Local or None,
you cannot configure a second and third method. If you configure another method and
then select Local or None as the first method, no other method is tried. User
authentication occurs in the order that the methods are selected. Possible methods are
as follows:
• Local. The user’s locally stored ID and password are used for authentication. This is
the default method. Because the local method does not time out, if you select this
option as the first method, no other method is tried, even if you specified more than
one method.
• RADIUS. The user’s ID and password are authenticated using the RADIUS server. If
you select Radius or Tacacs as the first method and an error occurs during the
authentication, the switch uses method 2 to authenticate the user.
• TACACS+. The user’s ID and password are authenticated using the TACACS+
server. If you select Radius or Tacacs as the first method and an error occurs during
the authentication, the switch attempts user authentication method 2.
• None. The authentication method is unspecified. If you select this option as the first
method, no other method is tried, even if you specified more than one method.
8. From the menu in the 2 column, select the authentication method, if any, that must be used
second in the selected authentication login list.
This is the method that is used if the first method times out. If you select a method that
does not time out as the second method, the third method is not tried.
9. From the menu in the 3 column, select the authentication method, if any, that must be used
third in the selected authentication login list.
10. From the menu in the 4 column, select the method, if any, that must be used fourth in the
selected authentication login list.
This is the method that is used if all previous methods time out.
11. Click the Apply button.
Your settings are saved.