User's Manual

Smart Managed Pro Switches MS510TX and MS510TXPP
Manage Device Security User Manual241
The Access Profile Configuration page displays. The page also shows the Profile
Summary section.
6. Take one of the following actions:
• T
o activate the access profile, select the Activate Profile radio button.
• T
o deactivate the access profile, select the Deactivate Profile radio button.
7. Click
the Apply button.
Your settings are saved.
8. T
o refresh the page with the latest information about the switch, click the Refresh button.
The following table describes the nonconfigurable data that is displayed.
Table 56. Access profile configuration profile summary
Field Description
Rule Type The action performed when the rules are matched.
Service Type The service type chosen. The policy is restricted by the service type chosen.
Source IP Address The source IP address of the client originating the management traf
fic.
Mask The subnet mask of the IP address.
Priority The priority of the rule.
Remove an Access Control Profile
If you do not want to use an access control profile, you can deactivate it. However, if you no
longer need a profile, you can remove it entirely.
To remove an access profile:
1. Connect
your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is of
f-network using an Ethernet cable.
2. Launch a web browser.
3. In
the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
Access the Switch on page 14.
The login window opens.
4. Enter
the switch’s password in the Password field.
The default password is password.
The System Information page displays.
5. Select Security
> Access > Access Control > Access Profile Configuration.
The Access Profile Configuration page displays.