User's Manual

Smart Managed Pro Switches MS510TX and MS510TXPP
Manage Device Security User Manual268
Add a Rule to a MAC ACL
To add a rule to a MAC ACL:
1. Connect
your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is of
f-network using an Ethernet cable.
2. Launch a web browser.
3. In
the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
Access the Switch on page 14.
The login window opens.
4. Enter
the switch’s password in the Password field.
The default password is password.
The System Information page displays.
5. Select Security
> ACL > Basic > MAC Rules.
The previous figure does not show all columns.
6. From
the ACL Name menu, select the MAC ACL.
For information about adding MAC ACLs, see
Configure a Basic MAC ACL on page 265.
7. In
the ID field, enter a whole number in the range of 1 to 50 to identify the rule.
8. From
the Match Every menu, select whether each Layer 2 MAC packet must be matched
against the rule:
• True. Each packet must match the selected
ACL rule.
• False. Not all packets need to match the selected
ACL rule.
9. In
the CoS field, specify the 802.1p user priority that must be compared against the
information in an Ethernet frame.
The range of valid values is 0 to 7.
10. In
the Destination MAC field, specify the destination MAC address that must be compared
against the information in an Ethernet frame.
The valid format is xx:xx:xx:xx:xx:xx.
11. In
the Destination MAC Mask field, specify the destination MAC address mask that must
be compared against the information in an Ethernet frame.