User's Manual

Smart Managed Pro Switches MS510TX and MS510TXPP
Manage Device Security User Manual276
Note: An implicit deny all rule is included at the end of an ACL list. This
means that if an ACL is applied to a packet, and if none of the explicit
rules match, then the final implicit deny all rule applies and the packet
is dropped.
Add a Rule for a Basic IP ACL
To add a rule for a basic IP ACL:
1. Connect
your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is of
f-network using an Ethernet cable.
2. Launch a web browser.
3. In
the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
Access the Switch on page 14.
The login window opens.
4. Enter
the switch’s password in the Password field.
The default password is password.
The System Information page displays.
5. Select Security
> ACL > Advanced > IP Rules.
The IP Rules table displays. The page also shows the Basic ACL Rule
Table section.
If one or more rules exist for the ACL, the rules display in the Basic
ACL Rule Table.
6. From
the ACL ID menu, select the IP ACL for which you want to add a rule.
For basic IP ACLs, this must be an ID in the range from 1 to 99.
7. Click
the Add button.
8. Specify the following match criteria for the rule: