User's Manual

Smart Managed Pro Switches MS510TX and MS510TXPP
Monitor the System User Manual295
4. Enter the switch’s password in the Password field.
The default password is password.
The System Information page displays.
5. Select Monitoring
> Ports > Port Statistics.
6. Select which type of interfaces display onscreen:
• T
o display physical ports only, click the PORTS link.
• T
o display LAGs only, click the LAGS link.
• T
o display both physical ports and LAGs, click the All link.
7. T
o view information about a single interface, type the interface number in the Go To
Interface field, and click the Go button.
8. Click
the Refresh button to refresh the page with the latest information about the switch.
The following table describes the per-port statistics displayed on the page.
Table 67. Port Status information
Field Description
Interface This object indicates the interface of the interface table entry associated with
this port on an adapter
.
Total Packets Received
Without Errors
The total number of packets received that were without errors.
Packets Received With Errors The number of inbound packets that contained errors preventing them from
being deliverable to a higher-layer protocol.
Broadcast Packets Received The total number of good packets received that were directed to
the broadcast
address. This does not include multicast packets.
Packets Transmitted Without
Errors
The number of frames that were transmitted by this port to its segment.