User's Manual

Smart Managed Pro Switches MS510TX and MS510TXPP
Hardware Specifications and Default
Settings
User Manual352
Hardware Specifications
Table 74. Hardware specifications
Feature Description
Interfaces Nine Ethernet RJ-45 ports and one fiber SFP+ ports:
• Ports g1–g4.
1 Gbps Ethernet ports
• Ports mg5–mg6.
2.5 Gbps Multi-Gigabit Ethernet ports
• Ports mg7–mg8.
5 Gbps Multi-Gigabit Ethernet ports
• Port xmg9.
10 Gbps Multi-Gigabit Ethernet port
• Port xg10.
Fiber port (SFP+)
Flash memory size 256 MB NAND
SDRAM size and type 512 MB DDR3 SDRAM
Switching capacity Non blocking full wire speed on all packet sizes
Forwarding method Store and forward
Packet forwarding rate • 1G.
1,488,000 pps
• 2.5G.
3,720,000 pps
• 5G.
7,440,000 pps
• 10G.
14,880,000 pps
MAC addresses 16 K
Green Ethernet • Automatic
power-down mode on a port when the link is down
• Short
cable mode
• EEE
mode
Supported protocols and standards • TCP/IP
• UDP
• HTTP
• ICMP
• TFTP
• DHCP
• IEEE
802.1D
• IEEE
802.1 p
• IEEE
802.1Q
• IEEE802.3
1000BASE-T and 10GBASE-T
• IEEE802.3az
(EEE)
• IEEE
802.3bz NBASE-T and MGBASE-T
• IEEE
802.1af (PoE)
• IEEE
802.1at (PoE+)
• IEEE
802.3ad Link aggregation (LAG with LACP)
• IEEE
802.1ab LLDP
• IEEE
802.1x RADIUS network access control