User's Manual

Smart Managed Pro Switches MS510TX and MS510TXPP
Configure System Information User Manual45
The server is added to the list. You can specify up to eight DNS servers. The Preference
field displays the server preference order. The preference is set in the order in which
preferences were entered.
9. T
o remove a DNS server from the list, do the following:
a. Select the check box for the server
.
b. Click
the Delete button.
10. Click
the Apply button.
Your settings are saved.
11. T
o refresh the page, click the Refresh button.
The following table displays DNS Server Configuration information.
Table 10. DNS Server Configuration information
Field Description
ID The identification of the DNS Server.
Preference Shows the preference of the DNS server. The preferences are
determined by the order in which they were entered.
Configure and View Host Name-to-IP Address Information
Use this page to manually map host names to IP addresses or to view dynamic host
mappings.
Add a Static Entry to the Dynamic Host Mapping Table
To add a static entry to the local dynamic host mapping table:
1. Connect
your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is of
f-network using an Ethernet cable.
2. Launch a web browser.
3. In
the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
Access the Switch on page 14.
The login window opens.
4. Enter
the switch’s password in the Password field.
The default password is password.
The System Information page displays.
5. Select System
> Management > DNS > Host Configuration.
The DNS Host Configuration page displays.
6. In
the Host Name (1 to 158 characters) field, specify the static host name to add.