User's Manual

Smart Managed Pro Switches MS510TX and MS510TXPP
Configure System Information User Manual47
The default password is password.
The System Information page displays.
5. Select System
> Management > DNS > Host Configuration.
The DNS Host Configuration page display.
6. Select
the check box for the entry to update.
7. Enter
the new information in the appropriate field.
8. Click
the Apply button.
Your settings are saved.
9. T
o clear all the dynamic host name entries from the list, click the Clear button.
The Dynamic Host Mapping table shows host name-to-IP address entries that the switch
learned.
The following table describes the dynamic host fields.
Table 11. Dynamic Host Mapping information
Field Description
Host The host name that you assign to the specified IP address.
Type The type of the dynamic entry.
IPv4/IPv6 Address The IP address associated with the host name.
Configure Green Ethernet Settings
Use this page to globally configure Green Ethernet features. Using the Green Ethernet
Configuration features allows for power consumption savings.
To configure the Green Ethernet settings:
1. Connect
your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is of
f-network using an Ethernet cable.
2. Launch a web browser.
3. In
the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
Access the Switch on page 14.
The login window opens.
4. Enter
the switch’s password in the Password field.
The default password is password.
The System Information page displays.
5. Select System
> Management > Green Ethernet > Green Ethernet Configuration.
The Green Ethernet Configuration page displays.