Operation Manual

Connecting to the Internet

Mobile Voice HSPA+ Broadband 11n Wireless Router MVBR1210C

Ethernet Broadband Settings

 To manually configure your Ethernet broadband Internet settings:

1. Log in to the router as described in Log In to Your Router on page 12.

2. From the main menu, select Ethernet Broadband Settings.

The following question displays at the top of the screen:

Select the option based on the type of account you have with your ISP.

• If you need to enter login information every time you connect to the Internet, or you

have a PPPoE account with your ISP, select Yes.

• Otherwise, select No.

Then fill out the appropriate screen.

For details, see one of the following:

• step a, Login required:

• step b, Login not required:.

Note: If you have installed PPP software such as WinPoET (from

Earthlink) or Enternet (from PacBell), then you have PPPoE. Select

Yes. After selecting Yes and configuring your router, you do not

need to run the PPP software on your computer to connect to the

Internet.

a. Login required:

Adjust the settings as needed based on your Internet connection. The fields in this

screen are described in Table 4.