User's Manual

Hardware Setup

N300 WiFi Router

You can use the LEDs to verify status and connections. The following table lists and

describes each LED and button on the front panel of the router.

Table 1. LED and button descriptions

LED Description

WiFi On/Off

button with LED

Pressing this button for two seconds turns the WiFi radio in the router on and off. If this LED

is lit, the WiFi radio is on. If this LED is off, the WiFi radio is turned off and you cannot use

WiFi to connect to the router.

WPS button with

LED

This button lets you use WPS to join the WiFi network without typing the WiFi password.

The WPS LED blinks during this process and then lights solid.

Power

• Solid green. The power is on, and the router is ready.

• Solid amber. When you apply power to the router, the Power LED lights and turns

amber within a few seconds.

This indicates that the self-test is running.

• Blinking green. A

firmware

update is in progress.

• Off. Power is not supplied to the router.

Internet

• Solid green.

• Solid amber.

• Off.

WiFi

• Solid green. The WiFi radio is operating.

• Off. The wireless

radio is off.