- Netgear Mobile Broadband Wireless-N Router Manual
10 | Chapter 1: Connecting to the Internet
Mobile Broadband Wireless-N Router MBRN3000
To log in to the router:
1. Ty
pe http://www.routerlogin.net in the address field of your browser, and then press
Enter. A login window displays:
2. Enter admin for the user name and your password (or the default, password). For
information about how to change the password, see “Changing the Built-In Password” on
page 23.
Note: If you changed your password and do not remember what it is, you
can restore the router to its factory settings. See
"Factory Default
Settings " in Appendix A.
3. If
the router has not been configured, the Smart Wizard screen displays. After the router has
been configured, the Firmware Upgrade assistant will appear.
• Check
ing for Firmware Updates screen. After initial setup, this screen displays
unless you have cleared the Check for Updated Firmware Upon Log-in checkbox.
• Router Status screen. The Router Status screen displays if the router’s Internet
connection has not been set up yet. See “Router Status” on
page 33.
4. Y
ou can use different methods to configure your router.
• Select Set
up Wizard from the router menu to set up your Internet connection and
wireless network configuration. See “Accessing the Setup Wizard After Installation”
on page 11.
• Y
ou can manually configure the router settings. See “Manually Configuring Your
Internet Settings” on p
age 11.