- Netgear ProSafe WFS709TP Smart Wireless Controller Manual

ManualsBrandsNETGEAR ManualsSwitchNetgear ProSafe WFS709TP Smart Wireless Controller WFS709TP-100NAS

161

162

163

164

165

166

167

168

169

170

Table Of Contents

WFS709TP ProSafe Smart Wireless Switch Software Administration Manual
Contents
About This Manual
- Conventions, Formats, and Scope
- How to Use This Manual
- How to Print this Manual
- Revision History
Chapter 1 Overview of the WFS709TP
- WFS709TP System Components
- Basic WLAN Configuration
- Wireless Client Access to the WLAN
- Configuring and Managing the WFS709TP
  - Tools
Chapter 2 Deploying a Basic WFS709TP System
- Configuration Overview
- Configuring the WFS709TP
- Deploying APs
- Additional Configuration
Chapter 3 Configuring Network Parameters
- Configuring VLANs
  - Assigning a Static Address to a VLAN
  - Configuring a VLAN to Receive a Dynamic Address
- Configuring Static Routes
- Configuring the Loopback IP Address
Chapter 4 RF Plan
- RF Plan Overview
- Before You Begin
  - Task Overview
  - Planning Requirements
- Using RF Plan
- RF Plan Example
Chapter 5 Configuring WLANS
- Before You Begin
  - Determine the Authentication Method
  - Determine the Default VLAN
- Basic WLAN Configuration in the Browser Interface
  - Example Configuration
- Advanced WLAN Configuration in the Browser Interface
- IntelliFi RF Management
Chapter 6 Configuring AAA Servers
- Configuring an External RADIUS Server
- Adding Users to the Internal Database
- Configuring Authentication Timers
Chapter 7 Configuring 802.1x Authentication
- 802.1x Authentication
  - Authentication with a RADIUS Server
  - Authentication Terminated on WFS709TP
- Configuring 802.1x Authentication
  - 802.1x Authentication Page
- Advanced Configuration Options for 802.1x
Chapter 8 Configuring the Captive Portal
- Overview of Captive Portal Functions
- Configuring Captive Portal
- Configuring Advanced Captive Portal Options
- Configuring the AAA Server for Captive Portal
  - Changing the Protocol to HTTP
- Personalizing the Captive Portal Page
Chapter 9 Configuring MAC-Based Authentication
- Configuring the WFS709TP
- Configuring Users
Chapter 10 Adding Local WFS709TPs
- Moving to a Multi-Switch Environment
- Configuring Local WFS709TPs
Chapter 11 Configuring Redundancy
- Virtual Router Redundancy Protocol
- Redundancy Configuration
Chapter 12 Configuring Wireless Intrusion Protection
- Rogue/Interfering AP Detection
- Misconfigured AP Detection
  - Configuring Misconfigured AP Protection
Chapter 13 Configuring Management Utilities
- Configuring Management Users
- Configuring SNMP
- Creating Guest Accounts
- Managing Files on the WFS709TP
- Installing a Server Certificate
Chapter 14 Configuring WFS709TP for Voice
- Voice over IP Proxy ARP
- Battery Boost
- Limiting the Number of Active Voice Calls
- WPA Fast Handover
Appendix A Configuring DHCP with Vendor-Specific Options
- Overview
- Windows-Based DHCP Servers
  - Configuring Option 60
  - Configuring Option 43
- Linux DHCP Servers
Appendix B Windows Client Example Configuration for 802.1x
- Window XP Wireless Client Example Configuration
Appendix C Internal Captive Portal
- Creating a New Internal Web Page
  - Basic HTML Example
- Installing a New Captive Portal Page
- Displaying Authentication Error Message
- Language Customization
- Customizing the Welcome Page
- Customizing the Pop-Up Box
- Customizing the Logged Out Box
Appendix D Related Documents
Index

WFS709TP ProSafe Smart Wireless Switch Software Administration Manual

12-6 Configuring Wireless Intrusion Protection

v1.0, June 2007