Operation Manual

5. For the Does your Internet connection require a login? setting, select the Yes radio button.
6. From the Internet Service Provider menu, select the encapsulation method: PPPoE, L2TP, or PPTP.
7. In the Login field, enter the login name that your ISP gave you.
This login name is often an email address.
8. In the Password field, type the password that you use to log in to your Internet service.
9. If your ISP requires a service name, type it in the Service Name (if Required) field.
10. From the Connection Mode menu, select Always On, Dial on Demand, or Manually Connect.
11. To change the number of minutes until the Internet login times out, in the Idle Timeout (In minutes) field, type
the number of minutes.
This is how long the router keeps the Internet connection active when no one on the network is using the Internet
connection. A value of 0 (zero) means never log out.
12. Select an Internet IP Address radio button:
• Get Dynamically from ISP.Your ISP uses DHCP to assign your IP address.Your ISP automatically assigns
these addresses.
• Use Static IP Address. Enter the IP address, IP subnet mask, and the gateway IP address that your ISP
assigned. The gateway is the ISP router to which your router connects.
13. Select a Domain Name Server (DNS) Address radio button:
Specify Your Internet Settings
28
Nighthawk X4S AC2600 Smart WiFi Router