User manual
Table Of Contents
- Nighthawk X6 AC3200 Tri-Band WiFi Router
- Contents
- 1. Hardware Setup
- 2. Connect to the Network and Access the Router
- 3. Specify Your Internet Settings
- 4. Optimize Performance
- 5. Control Access to the Internet
- 6. Tri-Band WiFi Connections
- 7. Share USB Devices Attached to the Router
- 8. Access USB Devices Through the Internet
- 9. Use the Router as a Media Server
- 10. Share a USB Printer
- 11. Network Settings
- Set Up a Default DMZ Server
- Change the Router’s Device Name
- Change the LAN TCP/IP Settings
- Specify the IP Addresses That the Router Assigns
- Disable the DHCP Server Feature in the Router
- Reserve LAN IP Addresses
- Use the WPS Wizard for WiFi Connections
- Specify Basic WiFi Settings
- Change the WiFi Password or Security Level
- Set Up a Guest Network
- Control the Wireless Radios
- Set Up a Wireless Schedule
- Specify WPS Settings
- 12. Manage Your Network
- 13. Use VPN to Access Your Network
- 14. Specify Internet Port Settings
- 15. Troubleshooting
- Sequence to Restart Your Network
- Check Ethernet Cable Connections
- Wireless Settings
- Network Settings
- Standard LED Behavior When the Router is Powered On
- Power LED Is Off or Blinking
- Power LED Stays Amber
- LEDs Never Turn Off
- Internet or Ethernet Port LEDs Are Off
- WiFi LED Is Off
- Cannot Log In to the Router
- Cannot Access the Internet
- Changes Not Saved
- Wireless Connectivity
- Troubleshoot Your Network Using the Ping Utility
- A. Supplemental Information
65
7
7. Share USB Devices Attached to the
Router
This chapter describes how to access and configure USB storage devices attached to your
router. The USB port on the router can be used only to connect USB storage devices like flash
drives or hard drives or a printer. Do not connect computers, USB modems, CD drives, or DVD
drives to the router USB port.
This chapter contains the following sections:
• USB Device Requirements
• Access a USB Device on the Network
• Back Up Windows Computers with ReadySHARE Vault
• Back Up Mac Computers with Time Machine
• Control Access to the USB Device
• Use FTP Within the Network
• View Network Folders on a USB Device
• Add a Network Folder on a USB Device
• Edit a Network Folder on a USB Device
• Approve USB Devices
• Safely Remove a USB Device
For more information about ReadySHARE features, visit www.netgear.com/readyshare.